Dinstar DWG2000F Manuel d'utilisateur télécharger pdf (Page 26)

DWG2000-16G User Manual

_______________________________________________________________________________

Dinstar Technologies Co., Ltd.

Alarm Threshold

（via SMS）

When the SIM remain time is or less than this value, DWG will send the alarm

SMS to remind the users of the SIM remain time.

Port Description

for Alarm

It is the identification mark of SIM/UIM card in the SMS report. The mobile

phone No. of the SIM/UIM card is recommended to use as the port description

for alarm, or any other string.

SIM Remain

Time

Indicates the current sim remain time. It can’t modified

Restore time

Recovers the SIM remain time to initial value, the Maximum Call Duration.

CLIR

Caller ID display restrict. This function is used to restrict the mobile phone

No. By adding “#31#” before the mobile phone ID, this funciton should be

supported by carrier.

Mobile Tx Gain

Transits gain of the mobile module, from IP side to PSTN side.

Mobile Rx Gain

Receives gain of the mobile module,from PSTN side to IP side.

Detect Reverse

Polarity

This option for CMDA Reverse Polarity detection. Most CDMA operators

don't offer polarity reverse . So VoIP to mobile, DWG2000-16G will connect

soon. It doesn't wait mobile side answer.

4.6.3 SIM/UIM Card Lock

Figure 4-6-3 Configuration of SIM/UIM Card Lock

Table 4-6-3 Description of Configuration of SIM/UIM Card Lock

Select Port

Select the Channel No. which need to be locked.

SIM Card Lock

SIM card lock or unlock. Default is “No”.

PIN Code

Correct PIN code is needed to lock or unlock the SIM card.

VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 59 60

Pas de commentaire

Dinstar DWG2000F Manuel d'utilisateur Page 26